Two-inch NPS does not mean a two-inch bore. Schedule changes wall thickness while the nominal name stays the same.
The listed steel subset is not an interchangeable PVC/CTS/SDR dimension table.
Use the selected calculated nominal ID in hydraulic tools; inspect the source revision and product tolerance for final decisions.
How to interpret the result
Compare Schedule 40 with Schedule 80 for the same NPS before calculating velocity or loss. Published nominal dimensions are useful planning data, not a measured bore guarantee.
Illustrative scenarios using this page’s calculation or verified reference model. Change the assumptions for your own job.
2 in steel Schedule 40: nominal designation versus bore
Given
Selected row
2 in · DN50 · Schedule 40
Calculation / lookup method
Preserve NPS/DN designation mappings; convert source inch OD and wall exactly to mm. Calculated ID = OD−2wall, bore area = πID²/4 and L/m = area[mm²]/1000. Schedule 40/80 are filters on this page, not duplicate URLs.
Result
Calculated nominal ID
52.502 mm
Outside diameter
60.325 mm
Wall thickness
3.912 mm
DN designation
50
Schedule
40
Inside diameter is derived from the selected nominal OD minus twice nominal wall thickness. It must not be interpreted as a guaranteed manufactured measurement.
Preserve NPS/DN designation mappings; convert source inch OD and wall exactly to mm. Calculated ID = OD−2wall, bore area = πID²/4 and L/m = area[mm²]/1000. Schedule 40/80 are filters on this page, not duplicate URLs.
CHECK THE METHOD
Worked example
2 in Schedule 40: OD 2.375 in, wall 0.154 in, calculated ID 2.067 in = 52.5018 mm. Schedule 80 at the same NPS has a smaller bore.
REAL INPUTS · CLEAR METHOD
Practical worked examples
Illustrative scenarios using this page’s calculation or verified reference model. Change the assumptions for your own job.
2 inch Schedule 40 nominal steel pipe ID
Given
Selected row
2 in · DN50 · Schedule 40
Calculation / lookup method
Preserve NPS/DN designation mappings; convert source inch OD and wall exactly to mm. Calculated ID = OD−2wall, bore area = πID²/4 and L/m = area[mm²]/1000. Schedule 40/80 are filters on this page, not duplicate URLs.
Result
Calculated nominal ID
52.502 mm
Outside diameter
60.325 mm
Wall thickness
3.912 mm
ID is derived from the bounded published OD/wall facts. NPS 2 is a designation, not an exact two-inch bore; confirm the supplied product.
Preserve NPS/DN designation mappings; convert source inch OD and wall exactly to mm. Calculated ID = OD−2wall, bore area = πID²/4 and L/m = area[mm²]/1000. Schedule 40/80 are filters on this page, not duplicate URLs.
Result
Calculated nominal ID
49.251 mm
Outside diameter
60.325 mm
Wall thickness
5.537 mm
The thicker wall reduces bore at the same listed OD. That difference changes velocity and pressure loss at a fixed flow.
Preserve NPS/DN designation mappings; convert source inch OD and wall exactly to mm. Calculated ID = OD−2wall, bore area = πID²/4 and L/m = area[mm²]/1000. Schedule 40/80 are filters on this page, not duplicate URLs.
Result
Calculated nominal ID
26.645 mm
Outside diameter
33.401 mm
Wall thickness
3.378 mm
Use the selected material/schedule facts rather than converting the nominal inch designation directly into a hydraulic diameter.
Can I use these values as a universal specification?
Nominal ID is derived from nominal dimensions, not a guaranteed measured inside diameter. No pressure rating, corrosion allowance, tolerance or code compliance is established.
TRACEABLE DATA
Sources, scope & verification
Dataset v1.2.0 Last verified:
Nine selected NPS 1/2–4 sizes, two schedules, from the archived Wheatland A53 product sheet. NPS5 is excluded due to source inch/mm disagreement. DN is a designation, not measured bore.
Values are curated product facts or generated scenarios. Paid standards, complete catalogs and source diagrams are not reproduced. A verification date applies to this documented subset.