Belts & Pulleys

Belt Speed Calculator

Enter pulley diameter and RPM to calculate the ideal linear speed at the pulley pitch line.

Inputs

rpm

ENTER ONCE → SELECT → VERIFY → SAVE

Continue as an engineering Job

Transfer shared values automatically through the preliminary checks, then keep a transparent Job Card.

KEEP THE JOB MOVING

Where does this result go next?

Formula

Belt linear speed

v = pi * D * n / 60

Worked example

Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.

Inputs

Pulley diameter
150 mm
Pulley speed
1,450 rpm

Result

Belt speed
11.39 m/s

Related calculators

Continue your workflow with a related calculation.

View all Belts & Pulleys calculators

Frequently asked questions

What diameter should I enter?

For engineering calculations, use the effective or pitch diameter used by your belt system rather than mixing diameter definitions.

Does the result account for slip?

No. It is the theoretical surface or pitch-line speed from diameter and RPM.

VALICALC · PRIVACY