Chains & Sprockets
Chain Travel per Revolution Calculator
Use chain pitch and sprocket tooth count to calculate the nominal linear chain travel for one full sprocket revolution.
Inputs
Verify inputs & continue
Continuous kinematics use real chain pitch and matching sprocket teeth. Verify the chain series and assembled link count; pitch alone does not identify capacity.
Tsubaki roller-chain assembly and pitch context
Use data for the actual component and operating conditions. Continue with the related calculations below after reviewing the selected result.
Formula
Chain advance per sprocket revolution
Worked example
Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.
Inputs
- Chain pitch
- 12.7 mm
- Sprocket teeth
- 19 teeth
Result
- Chain travel per revolution
- 241.3 mm
Related calculators
Continue your workflow with a related calculation.
Chains & Sprockets
Chain Speed Calculator
Calculate roller-chain linear speed from chain pitch, sprocket teeth, and RPM.
Chains & Sprockets
Sprocket Pitch Diameter Calculator
Calculate roller-chain sprocket pitch circle diameter from chain pitch and sprocket tooth count.
Chains & Sprockets
Sprocket RPM Calculator
Calculate driven sprocket RPM from driver RPM and sprocket tooth counts.
Frequently asked questions
Why is travel equal to pitch times teeth?
One sprocket revolution advances one chain pitch for each sprocket tooth around the pitch circle.
How is this related to chain speed?
Multiply travel per revolution by revolutions per minute, then convert the resulting distance per minute into the speed unit you need.