Electrical

Electrical Energy Cost Calculator

Build a multi-load energy and cost estimate with quantity, hours and duty cycle. Compare SI/US results and review the method, assumptions and related references below.

Change any input to update the calculation. Unit changes preserve the physical quantity.

CALCULATION SETUP

Inputs

Your local currency; excludes taxes, standing charges and demand tariffs.

Loads

Load 1
Need an input value?
Single & Three-Phase Power Reference ↗Motor kW & HP Conversion Chart ↗Use electrical real input power, not shaft output.
h/day
%

1 / 50 rows · each row keeps its own units

Calculated locally in your browser. No sign-up or input upload.

CALCULATED VALUE

Results

Daily energy

4 kWh

Period energy

120 kWh

365-day scenario energy

1,460 kWh

Period energy cost

24 local currency

365-day scenario cost

292 local currency

Connected nameplate power

1 kW

Calculation breakdown

Example
4 kWh/day

Only the result summary and canonical link are shared. Inputs and free-form names are excluded.

Assumptions & checks

An operating scenario, not a meter reading or tariff forecast. Connected power is not simultaneous demand; annual results repeat the daily scenario for 365 days.

Verify inputs & continue

Continuous power/current/energy arithmetic uses actual nameplate PF, load duty and tariff. Reference equations do not establish conductor or protection ratings.

Use data for the actual component and operating conditions. Continue with the related calculations below after reviewing the selected result.

Formula

Build a multi-load energy and cost estimate with quantity, hours and duty cycle

Daily kWh=Σ(power W × quantity × hours/day × duty/100)/1000. Period energy=daily×days; cost=kWh×entered tariff. Worked example: One 1 kW load at 4 h/day and 100% duty uses 4 kWh/day, 120 kWh in 30 days; tariff 0.20 gives 24.00.

Worked example

Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.

Inputs

Billing / planning days
30
Energy price per kWh
0.2
Row 1 · Name / label
Example
Row 1 · Real input power
1000 W
Row 1 · Identical loads
1
Row 1 · Hours per day
4
Row 1 · Average duty fraction
100

Result

Daily energy
4 kWh
Period energy
120 kWh
365-day scenario energy
1,460 kWh
Period energy cost
24 local currency
365-day scenario cost
292 local currency
Connected nameplate power
1 kW

Related calculators

Continue your workflow with a related calculation.

View all Electrical calculators

Frequently asked questions

What does this result tell me?

An operating scenario, not a meter reading or tariff forecast. Connected power is not simultaneous demand; annual results repeat the daily scenario for 365 days.

How can I check the calculation?

Worked example: One 1 kW load at 4 h/day and 100% duty uses 4 kWh/day, 120 kWh in 30 days; tariff 0.20 gives 24.00. Review each stated input and unit; use project-specific values rather than treating the editable example as a requirement.

Reference data & method sources

VALICALC · PRIVACY