Power, Torque & Speed
Force from Torque and Radius Calculator
Enter torque and the effective lever, pulley, drum, or sprocket radius to calculate the corresponding ideal tangential force.
Inputs
KEEP THE JOB MOVING
Where does this result go next?
Formula
Tangential force from torque
Worked example
Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.
Inputs
- Torque
- 50 N*m
- Effective radius
- 100 mm
Result
- Tangential force
- 500 N
Related calculators
Continue your workflow with a related calculation.
Power, Torque & Speed
Torque from Force and Radius Calculator
Calculate torque from tangential force and lever-arm radius with metric and imperial outputs.
Power, Torque & Speed
Radius from Torque and Force Calculator
Calculate the effective lever radius required to produce a target tangential force from a known torque.
Belts & Pulleys
Pulley Torque Ratio Calculator
Estimate ideal driven-shaft torque from input torque and driver/driven pulley diameters.
Power, Torque & Speed
Parallel Key Stress Calculator
Check nominal key shear and bearing stress, effective length and torque capacity using actual engagement and explicitly supplied allowable stresses.
Technical references for this calculation
Frequently asked questions
Does a smaller radius produce more force?
For the same torque, ideal tangential force increases as effective radius decreases.
Does this account for friction or efficiency?
No. It converts torque to ideal tangential force at the entered radius before drivetrain or contact losses.