Gears

Gear Circular Pitch Calculator

Enter gear module to calculate circular pitch measured along the reference circle from one tooth position to the next.

Inputs

Need an input value?
Gear Module Chart ↗Spur Gear Dimensions Reference ↗Module ↔ Diametral Pitch Chart ↗Confirm matching module/profile; catalog geometry is not a torque-capacity approval.

Verify inputs & continue

Continuous geometry/travel/speed is valid; matching module and real gear pitch geometry need a reference check.

Use data for the actual component and operating conditions. Continue with the related calculations below after reviewing the selected result.

Formula

Circular pitch from module

p = pi * m

Worked example

Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.

Inputs

Module
2 mm

Result

Circular pitch
6.2832 mm

Related calculators

Continue your workflow with a related calculation.

View all Gears calculators

Frequently asked questions

How is circular pitch related to module?

For metric gearing, circular pitch equals pi multiplied by module.

Is circular pitch measured along a straight line?

It is defined along the reference circumference between corresponding points of adjacent teeth.

VALICALC · PRIVACY