Gears

Gear Teeth Calculator for Target RPM

Enter driver tooth count, driver RPM, and desired driven RPM to calculate the ideal driven tooth-count target.

Inputs

teeth
rpm
rpm

CALCULATE → SELECT → VERIFY

Standard options

Compare real product sizes or documented assembly choices, then check the selected component in your calculation.

Choose the family you intend to use. A size calculation alone does not identify the product family.

Verify inputs & continue

Stock gear geometry is discrete. A bounded KHK SS catalog is compared by the solved dimension; fixed module/teeth compatibility is enforced where supplied.

Use data for the actual component and operating conditions. Continue with the related calculations below after reviewing the selected result.

Formula

Required driven tooth count

Z2 = Z1 * n1 / n2

Worked example

Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.

Inputs

Driver gear teeth
20 teeth
Driver speed
1,450 rpm
Target driven speed
483.33 rpm

Result

Calculated driven tooth count
60 teeth

Related calculators

Continue your workflow with a related calculation.

View all Gears calculators

Frequently asked questions

Can I use a fractional tooth count?

No. The result is a ratio target. Choose a practical whole tooth count and recalculate the actual driven RPM.

What else limits gear tooth count?

Gear geometry, undercut risk, module, pressure angle, center distance, strength, and available stock sizes can constrain the practical choice.

VALICALC · PRIVACY