Power, Torque & Speed
Power from Torque and RPM Calculator
Enter shaft torque and RPM to calculate mechanical power in watts, kilowatts, and horsepower.
Inputs
CALCULATE → SELECT → VERIFY
Standard options
Compare real product sizes or documented assembly choices, then check the selected component in your calculation.
Choose the family you intend to use. A size calculation alone does not identify the product family.
Verify inputs & continue
Required shaft output can be compared with named motor ratings. Only nearby ratings and a power margin are offered; current verification retains user efficiency/PF.
Use data for the actual component and operating conditions. Continue with the related calculations below after reviewing the selected result.
Formula
Mechanical shaft power
Worked example
Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.
Inputs
- Shaft torque
- 50 N*m
- Shaft speed
- 1,450 rpm
Result
- Mechanical power
- 7.592 kW
Related calculators
Continue your workflow with a related calculation.
Power, Torque & Speed
Torque from Power and RPM Calculator
Calculate shaft torque from mechanical power and rotational speed.
Power, Torque & Speed
RPM from Power and Torque Calculator
Calculate rotational speed from mechanical power and shaft torque.
Belts & Pulleys
Belt Speed Calculator
Calculate belt linear speed from pulley diameter and rotational speed.
Chains & Sprockets
Chain Speed Calculator
Calculate roller-chain linear speed from chain pitch, sprocket teeth, and RPM.
Power, Torque & Speed
Parallel Key Stress Calculator
Check nominal key shear and bearing stress, effective length and torque capacity using actual engagement and explicitly supplied allowable stresses.
Technical references for this calculation
Frequently asked questions
Is mechanical power the same as electrical input power?
Not necessarily. Motor and drivetrain efficiency determine the difference between electrical input and mechanical shaft output.
Can I enter pound-feet?
Yes. Torque inputs are converted internally before power is calculated.