VALICALC · 8 LOOKUPS
HVAC & Insulation references
Duct geometry, airflow, thermal conversions, air properties and named insulation products.
Search by tool, system, or quantity. Use ↑ ↓ and Enter to open a result.
HVAC & Insulation
Dry Air Properties Table
Look up generated dry-air density and viscosity at selected temperatures and 1 atm. Transfer a reviewed point to Duct Size without silently interpolating.
Open lookup →HVAC & Insulation
Duct Velocity Reference
Compare authored duct velocity scenarios at your airflow, view the required area and round diameter, then use the chosen velocity in Duct Size.
Open lookup →HVAC & Insulation
Humidity Ratio & Dew Point Reference
Look up humidity ratio, dew point and moist-air enthalpy for selected dry-bulb/RH pairs at 1 atm. Keep psychrometric conditions visible in HVAC planning.
Open lookup →HVAC & Insulation
Insulation R-Value Chart
Compare selected Climate Pro attic R-values, RSI and installed thickness. Use a named product target in the Blown-In Insulation calculation.
Open lookup →HVAC & Insulation
R-Value & U-Value Conversion Chart
Compare US R-value, SI resistance and reciprocal U-values for authored examples. Preserve the same assembly basis and units before using a heat-loss input.
Open lookup →HVAC & Insulation
Rectangular to Round Duct Chart
Compare rectangular duct area, hydraulic diameter and equal-area round diameter. Transfer actual rectangular dimensions to the existing Duct Size tool.
Open lookup →HVAC & Insulation
Round Duct CFM Chart
Look up round-duct airflow at an editable mean velocity, compare metric and inch diameters, and continue with a straight-duct loss calculation.
Open lookup →HVAC & Insulation
Thermal Conductivity & Layer R Reference
Compare authored conductivity scenarios at an editable flat-layer thickness. Read material-only R and conductance while keeping assembly heat loss separate.
Open lookup →