Freight & Logistics

Container Gross Weight Calculator

Sum loaded container gross mass and compare entered payload and gross ratings. Compare SI/US results and review the method, assumptions and related references below.

Change any input to update the calculation. Unit changes preserve the physical quantity.

CALCULATION SETUP

Inputs

Preset

Actual container tare

Need an input value?

Shipping Container Dimensions Chart ↗

Dunnage / securing material mass

Actual maximum gross mass

Need an input value?

Shipping Container Dimensions Chart ↗

Actual permitted payload

Need an input value?

Shipping Container Dimensions Chart ↗

Cargo items

Cargo item 1

Name / label

Gross mass per package

Package quantity

1 / 50 rows · each row keeps its own units

Calculated locally in your browser. No sign-up or input upload.

YOUR CALCULATION

Results

Packaged cargo mass

2,000 kg4,409.2452 lb

Cargo + securing material

2,200 kg4,850.1698 lb

Estimated loaded gross mass

4,400 kg9,700.3395 lb

Container tare

2,200 kg4,850.1698 lb

Remaining gross margin

26,080 kg57,496.558 lb

Remaining payload margin

26,080 kg57,496.558 lb

Total packages

100

Calculation breakdown

Example: 2,000 kg

Assumptions & checks

Enter actual CSC plate/equipment and carrier limits; defaults are editable examples. This planning sum is not certified VGM, a weighing procedure or authorization to ship.

KEEP THE JOB MOVING

Where does this result go next?

Same-step checkPallets per Container Calculator

Estimate pallet fit

Input lookupShipping Container Dimensions Chart

Review bounded equipment examples

Previous stepCartons per Pallet Calculator

Plan cartons on a pallet

Follow the full workflow: Container carton, pallet and payload plan →

Formula

Sum loaded container gross mass and compare entered payload and gross ratings

Payload=Σ(package gross mass×quantity)+dunnage; gross=payload+container tare. Remaining limits=entered rating−calculated mass. Worked example: 100 packages at 20 kg, dunnage 200 kg and tare 2200 kg gives 2200 kg payload and 4400 kg estimated container gross mass.

Worked example

Using the default values shown in the calculator, the same formula gives the following result. This is a quick sanity check for the calculation, not a design recommendation.

Inputs

Actual container tare: 2200 kg
Dunnage / securing material mass: 200 kg
Actual maximum gross mass: 30480 kg
Actual permitted payload: 28280 kg
Row 1 · Name / label: Example
Row 1 · Gross mass per package: 20 kg
Row 1 · Package quantity: 100

Result

Packaged cargo mass: 2,000 kg
Cargo + securing material: 2,200 kg
Estimated loaded gross mass: 4,400 kg
Container tare: 2,200 kg
Remaining gross margin: 26,080 kg
Remaining payload margin: 26,080 kg
Total packages: 100

Technical references for this calculation

Reference lookupPallet Size Chart

Frequently asked questions

What does this result tell me?

Enter actual CSC plate/equipment and carrier limits; defaults are editable examples. This planning sum is not certified VGM, a weighing procedure or authorization to ship.

How can I check the calculation?

Worked example: 100 packages at 20 kg, dunnage 200 kg and tare 2200 kg gives 2200 kg payload and 4400 kg estimated container gross mass. Review each stated input and unit; use project-specific values rather than treating the editable example as a requirement.

Reference data & method sources

IMO container gross mass
Mass balance of packages, securing material and container tare. This estimate is not certified VGM.
NIST SI conversion factors
SI/US dimensional conversions. Geometry and energy balances are stated explicitly, not attributed to a design standard.